projects

Project name: Intergaz Mooring Buoys Vessel name: Period: 2007-05-03 Description: Maintenance of 3 Mooring Buoys of Intergaz Sea Berth.

Project name: Overhaul of Aux Engine Vessel name: m/v Seewind Period: 2006-09-02 Description: Overhaul Aux Engine "Stork Workspoor".

Project name: Port Trim Tab Hydraulic Cylinder Vessel name: HSV-2 SWIFT Period: 2006-08-28 Description: Replacing the Port Trim Tab Hydraulic Cylinder on HSV-2 SWIFT.

Project name: Marking of "UN by WFP + logo" Vessel name: Catamaran Vittoria M Period: 2006-08-15 Description: Printing of "UN by WFP + logo" and placing them at both sides of the catamaran as well as at the top of the vessel.

Project name: Dismantling of Aux Engine and Removal of Crankshaft Vessel name: MT Torm Gunhild Period: 2006-08-13 Description: Dismantling of A-Frame, disconnecting and removing the Generator (Alternator), disconnecting the Flywheel, dismantling the Crankshaft, removing the Crankshaft from the Engine Room and taking it on Deck

Project name: Supply and Fitting of pad-eyes Vessel name: MT Torm Gunhild Period: 2006-08-09 Description: Supply 6 pcs lifting eye plates (pad eyes) with markings PL15, 75t, 1-1/8", CE. Fitting and welding 5 pcs pad eyes at the deck head of the engine room, above the diesel generator no.3, in 5 different locations as instructed by the ship's engineers. Carrying out an NDT (magnetic particles inspection) of all 5 lifting pad eyes and issue of relevant certificate

Project name: Combustible Gas Detection and Ultrasonic Thickness Gaugings Vessel name: PV Kerynia Period: 2006-07-14 Description: Gas free of fuel tanks, combustible gas detection, ultrasonic thickness gaugings of steel plates and issue of relevant reports. Steel repairs inside the fuel tanks.

Project name: Electric Power Supply Vessel name: M/V Sur & M/V Damur Period: 2006-06-29 Description: A 3-day project which required the Provision of Electric power supply to the Lebanese Navy Patrol Vessels Sur and Damur. Our company succesfully proved its ability to provide vessels with power supply through our 250KVA generator.

Project name: Repair of Hatchcovers Vessel name: Gracechurch Crown Period: 2006-06-27 Description: Repair of Hatchcovers and Anchor Chain Hawse Pipe.

Project name: LIFTING OUT OF WATER / LAUNCHING Vessel name: P/V SALAMIS Period: 2006-06-16 Description: Design and Fabrication of a Special Steel Cradle. Placing vessel on the cradle and Liffting her Out of Water as seated on the cradle, Untertaking and Performing Compete Maintenance of Hull including wood treatment and coating, Survey and Repair of the Propulsion System (shafts, bearings, propellers, rudders etc) On completion placing vessel back in water

Project name: Replace of High Pressure Air Unions Vessel name: USS Donald Cook Period: 2006-02-14 Description: Manufacture and Replace the stainless steel air pressure union nuts and one stainless steel pipe.

Project name: Construction of a Cradle for Salamis Patrol Vessel Vessel name: M/V Salamis Period: 2005-11-09 Description: Lifting of the vessel out of water and positioning it to a pre-constructed cradle for general maintenance. The cradle was especially designed and constructed to lift the vessel and had passed successfully from several load and welding tests.

Project name: Maersk Guardian Oil Rig Vessel name: Maersk Guardian Period: 2005-08-15 Description: General services provided during the stay of the oil rig in Limassol port.

Project name: Simian/Sienna & Sapphire Project for TECHNIP Vessel name: Toisa Proteus Period: 2005-07-12 Description: Mobilisation works carried out on board the vessel in Limassol Port for sub sea construction works.

Project name: Simian / Sienna & Sapphire Project for TECHNIP Vessel name: EDT Ares Period: 2005-07-03 Description: Mobilisation works carried out in Limassol port.

Project name: High Pressure Water Jet Cleaning Vessel name: Orient Queen Period: 2005-06-22 Description: Carrying out necessary preparation and cleaning by high pressure water jets, the port and starboard side of the ship from the quay level to the top using forklift, telescopic lift, generator and other cleaning means.

Project name: Gluecksburg Limassol Port Vessel name: Gluecksburg Period: 2005-05-22 Description: Repair of side damage by cropping and renewing of side plate stiffeners and side shell plates.

Project name: Steel Repairs Vessel name: Leon 1 Period: 2005-01-02 Description: Steel Repairs on Deck including renewal of ventilator heads, vent pipes, hatch coaming stiffeners, hatch cover lock devices.

Project name: Simian/Sienna & Sapphire Project for TECHNIP Vessel name: CSO Constructor - Mob 2 Period: 2004-12-14 Description: Mobilisation works carried out on board the vessel in Limassol Port for sub sea construction works.

Project name: Crane Jib Vessel name: Maersk Vaasa - Monrovia Period: 2004-12-04 Description: Repair / Renewal of damaged sections on the jib (boom) of Crane No. 1.

Project name: Simian/Sienna & Sapphire Project for TECHNIP Vessel name: CSO Constructor - Mob 1 Period: 2004-11-17 Description: Mobilisation works carried out on board the vessel in Limassol Port for sub sea construction works.

Project name: Sattelite Radome Antenna Vessel name: AIDAcara Period: 2004-10-10 Description: Assembly and Installation of a new Satellite Radome Antenna in Limassol Port.

Project name: Navy and Police Patrol Vessels Vessel name: P03, PV22 Period: 2004-08-30 Description: Lift out of water and general maintenance of hull.

Project name: Private Yacht Vessel name: MV Carinthia Period: 2003-09-25 Description: Repair / Fabrication of Anchor Flap / Cover.

Project name: Submarine Vessel name: Sadko Period: 2003-04-29 Description: Lift out of water, General Maintenance of hull including High Pressure Water cleaning, Grit Blasting, Coating, Steel Repairs.